PART 1910—OCCUPATIONAL SAFETY AND HEALTH STANDARDS
Subpart A—General§1910.1 Purpose and scope.
§1910.3 Petitions for the issuance, amendment, or repeal of a standard.
§1910.4 Amendments to this part.
§1910.5 Applicability of standards.
§1910.6 Incorporation by reference.
§1910.7 Definition and requirements for a nationally recognized testing laboratory.
§1910.8 OMB control numbers under the Paperwork Reduction Act.
§1910.9 Compliance duties owed to each employee.
Subpart B—Adoption and Extension of Established Federal Standards§1910.11 Scope and purpose.
§1910.12 Construction work.
§1910.15 Shipyard employment.
§1910.16 Longshoring and marine terminals.
§1910.17 Effective dates.
§1910.18 Changes in established Federal standards.
§1910.19 Special provisions for air contaminants.
Subpart C [Reserved]
Subpart D—Walking-Working Surfaces§1910.21 Scope and Definitions.
§1910.22 General requirements.
§1910.24 Step bolts and manhole steps.
§1910.27 Scaffold and rope descent systems.
§1910.28 Duty to have fall protection and falling object protection.
§1910.29 Fall protection systems and falling object protection—criteria and practices.
§1910.30 Training requirements.
Subpart E—Exit Routes and Emergency Planning§1910.33 Table of contents.
§1910.34 Coverage and definitions.
§1910.35 Compliance with alternate exit-route codes.
§1910.36 Design and construction requirements for exit routes.
§1910.37 Maintenance, safeguards, and operational features for exit routes.
§1910.38 Emergency action plans.
§1910.39 Fire prevention plans.
Appendix to Subpart E of Part 1910—Exit Routes, Emergency Action Plans, and Fire Prevention Plans
Subpart F—Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms§1910.66 Powered platforms for building maintenance.
§1910.67 Vehicle-mounted elevating and rotating work platforms.
Subpart G—Occupational Health and Environmental Control§1910.94 Ventilation.
§1910.95 Occupational noise exposure.
§1910.97 Nonionizing radiation.
§1910.98 Effective dates.
Subpart H—Hazardous Materials§1910.101 Compressed gases (general requirements).
§1910.105 Nitrous oxide.
§1910.106 Flammable liquids.
§1910.107 Spray finishing using flammable and combustible materials.
§1910.109 Explosives and blasting agents.
§1910.110 Storage and handling of liquefied petroleum gases.
§1910.111 Storage and handling of anhydrous ammonia.
§1910.119 Process safety management of highly hazardous chemicals.
§1910.120 Hazardous waste operations and emergency response.
§1910.122 Table of contents.
§1910.123 Dipping and coating operations: Coverage and definitions.
§1910.124 General requirements for dipping and coating operations.
§1910.125 Additional requirements for dipping and coating operations that use flammable liquids or liquids with flashpoints greater than 199.4 °F (93 °C).
§1910.126 Additional requirements for special dipping and coating operations.
Subpart I—Personal Protective Equipment§1910.132 General requirements.
§1910.133 Eye and face protection.
§1910.134 Respiratory protection.
§1910.135 Head protection.
§1910.136 Foot protection.
§1910.137 Electrical protective equipment.
§1910.138 Hand protection.
§1910.140 Personal fall protection systems.
Appendix A to Subpart I of Part 1910—References for Further Information (Non-mandatory)
Appendix B to Subpart I of Part 1910—Nonmandatory Compliance Guidelines for Hazard Assessment and Personal Protective Equipment Selection
Appendix C to Subpart I of Part 1910—Personal Fall Protection Systems Non-Mandatory Guidelines
Appendix D to Subpart I of Part 1910—Test Methods and Procedures for Personal Fall Protection Systems Non-Mandatory Guidelines
Subpart J—General Environmental Controls§1910.141 Sanitation.
§1910.142 Temporary labor camps.
§1910.143 Nonwater carriage disposal systems. [Reserved]
§1910.144 Safety color code for marking physical hazards.
§1910.145 Specifications for accident prevention signs and tags.
§1910.146 Permit-required confined spaces.
§1910.147 The control of hazardous energy (lockout/tagout).
Subpart K—Medical and First Aid§1910.151 Medical services and first aid.
Subpart L—Fire Protection§1910.155 Scope, application and definitions applicable to this subpart.
§1910.156 Fire brigades.
Portable Fire Suppression Equipment§1910.157 Portable fire extinguishers.
§1910.158 Standpipe and hose systems.
Fixed Fire Suppression Equipment§1910.159 Automatic sprinkler systems.
§1910.160 Fixed extinguishing systems, general.
§1910.161 Fixed extinguishing systems, dry chemical.
§1910.162 Fixed extinguishing systems, gaseous agent.
§1910.163 Fixed extinguishing systems, water spray and foam.
Other Fire Protection Systems§1910.164 Fire detection systems.
§1910.165 Employee alarm systems.
Appendices to Subpart L of Part 1910—Note
Appendix A to Subpart L of Part 1910—Fire Protection
Appendix B to Subpart L of Part 1910—National Consensus Standards
Appendix C to Subpart L of Part 1910—Fire Protection References For Further Information
Appendix D to Subpart L of Part 1910—Availability of Publications Incorporated by Reference in Section 1910.156 Fire Brigades
Appendix E to Subpart L of Part 1910—Test Methods for Protective Clothing
Subpart M—Compressed Gas and Compressed Air Equipment§§1910.166-1910.168 [Reserved]
§1910.169 Air receivers.
Subpart N—Materials Handling and Storage§1910.176 Handling materials—general.
§1910.177 Servicing multi-piece and single piece rim wheels.
§1910.178 Powered industrial trucks.
§1910.179 Overhead and gantry cranes.
§1910.180 Crawler locomotive and truck cranes.
Subpart O—Machinery and Machine Guarding§1910.211 Definitions.
§1910.212 General requirements for all machines.
§1910.213 Woodworking machinery requirements.
§1910.214 Cooperage machinery. [Reserved]
§1910.215 Abrasive wheel machinery.
§1910.216 Mills and calenders in the rubber and plastics industries.
§1910.217 Mechanical power presses.
§1910.218 Forging machines.
§1910.219 Mechanical power-transmission apparatus.
Subpart P—Hand and Portable Powered Tools and Other Hand-Held Equipment§1910.241 Definitions.
§1910.242 Hand and portable powered tools and equipment, general.
§1910.243 Guarding of portable powered tools.
§1910.244 Other portable tools and equipment.
Subpart Q—Welding, Cutting and Brazing§1910.251 Definitions.
§1910.252 General requirements.
§1910.253 Oxygen-fuel gas welding and cutting.
§1910.254 Arc welding and cutting.
§1910.255 Resistance welding.
Subpart R—Special Industries§1910.261 Pulp, paper, and paperboard mills.
§1910.263 Bakery equipment.
§1910.264 Laundry machinery and operations.
§1910.266 Logging operations.
§1910.269 Electric power generation, transmission, and distribution.
§1910.272 Grain handling facilities.
Subpart S—Electrical§1910.301 Introduction.
Design Safety Standards for Electrical Systems§1910.302 Electric utilization systems.
§1910.304 Wiring design and protection.
§1910.305 Wiring methods, components, and equipment for general use.
§1910.306 Specific purpose equipment and installations.
§1910.307 Hazardous (classified) locations.
§1910.308 Special systems.
Safety-Related Work Practices§1910.331 Scope.
§1910.333 Selection and use of work practices.
§1910.334 Use of equipment.
§1910.335 Safeguards for personnel protection.
Safety-Related Maintenance Requirements§§1910.361-1910.380 [Reserved]
Safety Requirements for Special Equipment§§1910.381-1910.398 [Reserved]
Definitions§1910.399 Definitions applicable to this subpart.
Appendix A to Subpart S of Part 1910— References for Further Information
Subpart T—Commercial Diving Operations
General§1910.401 Scope and application.
Personnel Requirements§1910.410 Qualifications of dive team.
General Operations Procedures§1910.420 Safe practices manual.
§1910.421 Pre-dive procedures.
§1910.422 Procedures during dive.
§1910.423 Post-dive procedures.
Specific Operations Procedures§1910.424 SCUBA diving.
§1910.425 Surface-supplied air diving.
§1910.426 Mixed-gas diving.
Equipment Procedures and Requirements§1910.430 Equipment.
Recordkeeping§1910.440 Recordkeeping requirements.
Appendix A to Subpart T of Part 1910—Examples of Conditions Which May Restrict or Limit Exposure to Hyperbaric Conditions
Appendix B to Subpart T of Part 1910—Guidelines for Scientific Diving
Appendix C to Subpart T of Part 1910—Alternative Conditions Under §1910.401(a)(3) for Recreational Diving Instructors and Diving Guides (Mandatory)
Subparts U-Y [Reserved]
Subpart Z—TOXIC AND HAZARDOUS SUBSTANCES
§1910.1000 Air contaminants.
§1910.1002 Coal tar pitch volatiles; interpretation of term.
§1910.1003 13 Carcinogens (4-Nitrobiphenyl, etc.).
§1910.1006 Methyl chloromethyl ether.
§1910.1007 3,′-Dichlorobenzidine (and its salts).
§1910.1008 bis-Chloromethyl ether.
§1910.1017 Vinyl chloride.
§1910.1018 Inorganic arsenic.
§1910.1020 Access to employee exposure and medical records.
§1910.1026 Chromium (VI).
§1910.1029 Coke oven emissions.
§1910.1030 Bloodborne pathogens.
§1910.1043 Cotton dust.
§1910.1047 Ethylene oxide.
§1910.1052 Methylene Chloride.
§1910.1053 Respirable Crystalline Silica.
§1910.1096 Ionizing radiation.
§1910.1200 Hazard communication.
§1910.1201 Retention of DOT markings, placards and labels.
§1910.1450 Occupational exposure to hazardous chemicals in laboratories.